1. Regularly check the various parts of the packaging machine screws to prevent loosening.
2. Note that the electrical part of the waterproof, moisture-proof, anti-corrosion and rodents. The electronic control box and terminals need to be kept
clean to prevent an electrical fault.
3. Downtime when the roller is in the open position so that the two heat-sealing, and prevent scorch packaging material.
4. Timing to the packaging machine at the gear mesh, seat belt bearing the filling hole and the moving parts lubricated oil fill. Please note that the oil
droplets on the drive belt, to avoid causing slipping lost turn or belt aging damage when filling oil.
Mixing and stirring frozen cylinder cleaning?
Allocation the four nut on the valve body is fixed to the front of the machine screw, remove the distribution valve body, stirring shaft is removed from the
freezing cylinder, 1:50 84 disinfectant soak for 10-15 minutes, moistened with disinfectant rag frozen cylinder wipe again after cleaning, use a clean rag to
wipe once, stirring shaft and the allocation of the valve body to re-install up, the constructor and parts of the ice cream machine name, see the structure
on the icon in the ice cream machine instructions. You can see inside the mixing shaft (Figure two circular white) Figure upload BH7236 previous distribution
valve body removed to ice it can not be online face to see