Home > colloid mill > Colloid mill maintenance and maintenance
Colloid mill maintenance and maintenance
2012-08-20 by seoer9

(1) Check the the pellets making machine pipeline and a junction or loosening. Hand rotation colloid mill, colloid mill Just look at whether flexible.
(2) added to the bearing mice bearing lubrication oil, observe the oil level should be at the centerline of the oil the subject, lubricants should be

promptly replaced or supplemented.
(3) Unscrew the the diversion drain plug colloid mill pump body, the perfusion water diversion (, or citation pulp).
(4) close the outlet pipe the road gate valve and outlet pressure gauge and vacuum gauge imported.
(5) of the motor, and proved the motor rotation is correct.
(6) start the motor, when normal operation after colloid mill, open the outlet pressure gauge and imported vacuum pump depending on the display the

appropriate pressure, gradually open the valve, check the motor load.
(7) try to control the colloid mill flow and head range indicated on the plate, to ensure the colloid mill to operate at maximum efficiency in order to get

the most out of the energy-saving effect.
(8) is a colloid mill during operation, the bearing temperature can not exceed the ambient temperature 35C, the maximum temperature not exceeding 80C. (9) If

Colloid Mill abnormal sound reason should immediately stop checking.
(10) to stop using colloid mill, close the valve, pressure gauge, and then stop the motor.
 (11) colloid mill in the first month of work, 100 hours replacement of oil after each 500 hours, change the oil once.
(12) often adjust the packing gland, Shanghai Masaoku Pump Manufacturing Co., Ltd. to ensure that the the packed indoor drip circumstances normal (as

appropriate) drip out.
(13) regularly check the wear of the sleeve, wear larger should be replaced as.
(14) colloid mill in the winter season, after coming to a stop, the pump body lower part of the water drain plug unscrew the media put the net. The prevent

Donglie.
(15) and the colloid mill long-term disabled, the pump all apart, dry water, rotating parts and junction coated with grease installed properly save.

keywords:colloid mill