Home > peanut sheller > Peanut shelling machine use requirements
Peanut shelling machine use requirements
2013-03-27 by seoer9

peanut sheller three requirements
1) shelling clean, high productivity, the shelling machine cleaning device also requires higher cleanliness.
2) loss of low broken rate.
3) The structure is simple and reliable to use, easy to adjust, less power consumption, some versatility off a variety of crops, in order to improve the utilization of the machinery.
Peanut two requirements
Peanut suitable for dry and wet, too dry crushing ratio; too wet to affect efficiency. Peanuts (skin fruit stored rural) are generally more dry, wet and dry it suitable for the following methods can be used.
1) Winter shelling. Sprayed evenly with about 10kg of warm water before shelling 50kg skin fruit and covered with plastic film for about 10 hours, and then about 1 hour to start shelling Liangshai sun, the other seasons covered with plastic film

Lid time of about 6 hours, remaining the same.
2) peanuts (skin drier fruit) dip in the large pool, the dip immediately remove and covered with plastic film around one day, and then in the sun Liangshai, began shelling After the wet and dry suitable.
Use requirements
Single-phase motor to work properly, the voltage required to achieve its rated voltage. The countryside in a village only one transformer, and the household is located and dispersed, combined with the use of wires and circuit is not very standard, resulting in far away from the transformer users of its electricity

The lack of pressure, the workplace should be selected from the transformer closer.

keywords:peanut sheller