Home > peeling machine > Granule packing machine maintenance
Granule packing machine maintenance
2012-11-13 by seoer9

Granule packing machine maintenance is essential for prolonged use.

1, the housing portion of the particle pellet packing machine is equipped with a fuel gauge, boot before all refueling time, according to each bearing temperature rise and functioning halfway add the.

Worm gear box must be long-term storage of oil, the oil surface height worm gear all invasive oil, such as the frequent use of once every March, a new oil provincial judge at the bottom of the oil plug, put oil use.

Granule packing machine refueling, do not make the oil spill cup outside and let flow around the machine and the floor. Materials pollution, affect product quality oils.

Check parts regularly, once a month, check the worm gear, worm, lubrication block bolts, bearings and other activities flexible and wear parts rotate, discovered defects should be repaired in time, shall not be reluctant to use.

Granule packing machine should be placed in a dry, clean indoor use, shall not contain acids and other corrosive gases in the body circulation place in the atmosphere.

6, granule powder packing machine after use or stop, you should remove the rotating drum cleaning brush cleared bucket remaining flour sub, and then properly installed, ready to work for the next use.

7, ran around the drum work, adjustment M10 screw to the appropriate location on the front bearing and death. Gear shaft ran adjust the the bearing shelf behind M10 screw to the appropriate location, adjust the gap to the bearing does not sound hand turn skin

Pulley, elastic proper, appropriate, too tight or too loose can the native may damage occurred.

If disabled longer must machines systemic wipe clean, mechanical Glossy coated with anti-rust oil, cloth booth

keywords:peeling machine