Home > pellet packing machine > Oil press maintenance
Oil press maintenance
2012-10-31 by seoer9

1, the pressure of the oil pump oil to be filtered, the concentration is not too large, the best use of rapeseed oil, soybean oil and peanut oil, prohibit the use of gasoline, kerosene and other flammable oil.
2, the fuel tank to be kept clean, each work about three months to clean the fuel tank and replace the new oil, or remove the filter inside the oil before using. Impurities will cause pump wear in the oil and cause the oil duct blockage, the impact of the oil press work.
Connecting pin, handle pump should always add oil to reduce wear and tear.
4, oilpressshould be installed in the indoor use, in order to avoid the open wind and rain, caused rust and cooking oil pollution.
5, when the long-term parking, the machine should wipe oiled, and covered with a protective cover